/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is mozilla.org code.
 *
 * The Initial Developer of the Original Code is Mozilla Corporation.
 * Portions created by the Initial Developer are Copyright (C) 2007
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *  Justin Dolske <dolske@mozilla.com> (original author)
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */


#include "nsISupports.idl"

interface nsIFile;
interface nsILoginInfo;

[scriptable, uuid(18b5acbd-36dc-496d-9212-6f1a3c068a84)]

/*
 * NOTE: This interface is intended to be implemented by modules
 *       providing storage mechanisms for the login manager.
 *       Other code should use the login manager's interfaces
 *       (nsILoginManager), and should not call storage modules
 *       directly.
 */
interface nsILoginManagerStorage : nsISupports {
    /**
     * Initialize the component. Not invoked automatically.
     */
    void init();


    /**
     * Initialize the component, but override the default filename
     * locations. This is primarily used to the unit tests and profile
     * migration.
     *
     * @param aInputFile
     *        File to read for stored logins.
     * @param aOutputFile
     *        If non-null, file to output logins to.
     *
     */
    void initWithFile(in nsIFile aInputFile, in nsIFile aOutputFile); 


    /**
     * Store a new login.
     *
     * @param aLogin
     *        The login to be added.
     */
    void addLogin(in nsILoginInfo aLogin);


    /**
     * Remove a login from the login manager.
     *
     * @param aLogin
     *        The login to be removed.
     */
    void removeLogin(in nsILoginInfo aLogin);


    /**
     * Modify an existing login in the login manager.
     *
     * @param aLogin
     *        The login to be modified.
     */
    void modifyLogin(in nsILoginInfo oldLogin, in nsILoginInfo newLogin);


    /**
     * Remove all stored logins.
     *
     * The browser sanitization feature allows the user to clear any stored
     * passwords. This interface allows that to be done without getting each
     * login first (which might require knowing the master password).
     *
     */
    void removeAllLogins();


    /**
     * Fetch all logins in the login manager. An array is always returned;
     * if there are no logins the array is empty.
     *
     * @param count
     *        The number of elements in the array. JS callers can simply use
     *        the array's .length property, and supply an dummy object for
     *        this out param. For example: |getAllLogins({})|
     * @param logins
     *        An array of nsILoginInfo objects. 
     *
     * NOTE: This can be called from JS as:
     *       var logins = pwmgr.getAllLogins({});
     *       (|logins| is an array).
     */
    void getAllLogins(out unsigned long count,
                      [retval, array, size_is(count)] out nsILoginInfo logins);


    /**
     * Obtain a list of all hosts for which password saving is disabled.
     *
     * @param count
     *        The number of elements in the array. JS callers can simply use
     *        the array's .length property, and supply an dummy object for
     *        this out param. For example: |getAllDisabledHosts({})|
     * @param hostnames
     *        An array of hostname strings, in origin URL format without a
     *        pathname. For example: "https://www.site.com".
     *
     * NOTE: This can be called from JS as:
     *       var logins = pwmgr.getAllDisabledHosts({});
     */
    void getAllDisabledHosts(out unsigned long count,
                      [retval, array, size_is(count)] out wstring hostnames);


    /**
     * Check to see if saving logins has been disabled for a host.
     *
     * @param aHost
     *        The hostname to check. This argument should be in the origin
     *        URL format, without a pathname. For example: "http://foo.com".
     */
    boolean getLoginSavingEnabled(in AString aHost);


    /**
     * Disable (or enable) storing logins for the specified host. When
     * disabled, the login manager will not prompt to store logins for
     * that host. Existing logins are not affected.
     *
     * @param aHost
     *        The hostname to set. This argument should be in the origin
     *        URL format, without a pathname. For example: "http://foo.com".
     * @param isEnabled
     *        Specify if saving logins should be enabled (true) or
     *        disabled (false)
     */
    void setLoginSavingEnabled(in AString aHost, in boolean isEnabled);


    /**
     * Search for logins matching the specified criteria. Called when looking
     * for logins that might be applicable to a form or authentication request.
     *
     * @param count
     *        The number of elements in the array. JS callers can simply use
     *        the array's .length property, and supply an dummy object for
     *        this out param. For example: |findLogins({}, hostname, ...)|
     * @param aHostname
     *        The hostname to restrict searches to. When looking for form
     *        logins, this argument should be in origin URL format, without
     *        a pathname. For example: "http://www.site.com". For protocol
     *        logins (http//ftp), it should be the hostname with a port
     *        appended. For example: "www.bar.com:443".
     * @param aActionURL
     *        For form logins, this argument should be the URL to which the
     *        form will be submitted. For protocol logins, specify null.
     * @param aHttpRealm
     *        For protocol logins, this argument should be the HTTP Realm
     *        for which the login applies. This is obtained from the
     *        WWW-Authenticate header. See RFC2617. For form logins,
     *        specify null.
     * @param logins
     *        An array of nsILoginInfo objects. 
     *
     * NOTE: This can be called from JS as:
     *       var logins = pwmgr.findLogins({}, hostname, ...);
     *
     */
    void findLogins(out unsigned long count, in AString aHostname,
                    in AString aActionURL,   in AString aHttpRealm,
                    [retval, array, size_is(count)] out nsILoginInfo logins);


   /**
    * Search for logins matching the specified criteria, as with
    * findLogins(). This interface only returns the number of matching
    * logins (and not the logins themselves), which allows a caller to
    * check for logins without causing the user to be prompted for a master
    * password to decrypt the logins.
    *
    * @param aHostname
    *        The hostname to restrict searches to.
    * @param aActionURL
    *        The URL to which a form login will be submitted. To match any
    *        form login, specify an empty string. To not match any form
    *        login, specify null.
    * @param aHttpRealm
    *        The HTTP Realm for which the login applies. To match logins for
    *        any realm, specify an empty string. To not match logins for any
    *        realm, specify null.
    */
   unsigned long countLogins(in AString aHostname, in AString aActionURL,
                             in AString aHttpRealm);
};
